The Best Way to Generate a wooden Stairs to the second floor with your own hands – drawings and instructions

Blueprints of stairs, presented on the web, make it easy to pick the perfect option. But each home has its own design features. Therefore, ready-made alternatives may not operate. Yes, also left by his own hands drawing, that will be set up stairs, is going to be a unique source of pride of their owner in front of relatives, neighbors, friends.

To begin with, determine the positioning of the future design and create the following dimensions:

  • The height of the opening. Since the basis is taken the finishing floor, the first and second floors. The distance from you to another is the required parameter.
  • The width of this opening. It must be noted that it can have another configuration: from the very popular – rectangular to shaped (circle, oval or alternative non invasive performance). This parameter significantly impacts the selection of design.
  • Height in the ceiling to the floor of the floor. In the future will allow you to figure out the height of the passage and the suitable design and building of the stairs in the home.

Diagram and drawing of the staircase with dimensions in height and width. Draws a scale design of the first floor at a private house. A place is defined for the beginning of the staircase, the period of the flight of stairs is marked on the ground. If the design of the first floor in the location of the structure has projections, window and door openings, niches, communications, and then they’re drawn in the scheme with a reference to its supporting structures. These prevent them from overlapping even in the design stage. The further details and dimensions in the program, the fewer problems during installation.

Before Creating a drawing, then you should carefully examine the construction standards for stairs:

  • The depth, width, height of these steps along the full length of the structure should not change. This ensures the convenience and safety of motion;
  • The width of this stairwell for straight flights of stairs should be in 900 mm, for spiral constructions from 800 mm;
  • The height of the fence 900-1200 mm. It’s Better if It’s provided on both sides of the staircase;
  • The drawing with the dimensions of elevation of a ladder handrail

For skipped designs on the narrowest part of 100 mmon the broad to 400 mm, at the middle of 200-250 mm. Overhang of treads up to 50 mm is permitted;

  • The elevation of the measures must be in the range of 100-180 mm
  • The angle of slope up to 45˚;
  • When the stairs go directly to the door, is outfitted with another platform breadth of at least a meter;
  • The recommended amount of steps for one airport – 18 pcs.
  • Proper drawings of the stairs to the next floor could be made just on the grounds of these parameters and additional calculations. Each type of structure has its own characteristics.

    There Are Lots of ways to compile layout documentation:

    • Independently. Create a calculation and execute stairs drawing for simple designs (directly, rotary with a platform) under force for most. More Intricate choices are better left to professionals
    • Programs for stair design. They permit you to make a comprehensive layout, to have a visualization of the structure before setup and to make alterations. Utilizing 3D images you may observe how the stairs will fit in the surrounding interior. In this case it may take a few days to master the applications;
    • Ready-made solutions. Drawings of stairs introduced online could be provided with comprehensive detailing and with no. Such projects should be checked for compliance with calculations and building regulations. For advice, you can turn to professionals.